Roll On Sugar Paste 150g

No Ingrown Hairs

Thinner, Finer Regrowth

No Torn Skin

No Itchy Regrowth

Hair -Free for up to 4 Weeks

1 x Roll On Sugar Paste 150g

10 x Waxing Strips

Step1: Remove the wax cartridge from the warming device, hot water or microwave. Position it so that the roller is face down toward the part of the body you are removing hair from.

Step 2: Roll the wax cartridge over the body in a single swipe, squeezing gently as you do so to dispense a thin layer of wax onto the skin.

Step 3: Set the wax cartridge aside and place a fabric cloth, provided with the wax, onto the thin layer of wax.

Step 4: Allow the fabric to remain in place until the wax cools slightly, which can take between 30 and 60 seconds.

Step 5: Grasp one corner of the fabric strip and pull it off in a rapid motion to remove the wax and the hair from the body.

1. Roll and test: Roll a new cartridge on to a wax strip before use on a client to ensure the wax is heated and flowing through the cartridge head evenly.

2. Light touch: Use light application and never force the cartridge to roll on the skin. The wax will flow more evenly if you hold the cartridge forwards on a 45 degree angle.

3. Keep it clean: Wipe away drips off the cartridge head in between applications using a wax strip and Caronlab After Waxing Oil.

4. Keep the temperature even: Always keep a consistent working temperature on the heater dial.

5. Cartridge skirts: For added protection against wax dribbles, use the cartridge skirts to collect any drips. And always make sure you wipe any wax residue off the heater with a wax remover .

6. Don’t re-use cartridges: A new cartridge or cartridge head should be used on each client. Fixed head cartridges are single use only. While refillable head cartridges can be removed and sanitized before refilling the cartridge with refills.

7. Wipe up the drips: Never allow waxing residue to leak into the heater as the empty cartridge could get stuck inside and ruin the system.

8. Don’t overheat cartridges: If using more than one heater, ensure you rotate the cartridges so that they are not over-heated for a long period of time.